Do you know the operation method of Rice Polisher? Let's take a look at it briefly!
1. Put the Rice polisher on the workbench steadily and plug in the power plug.
2. Determine the whitening time and adjust the timing knob.

3. Take out the pressed thallium in the hopper, take 17-20g of brown rice (the moisture content should not exceed 15%), put it into the hopper, and let it flow into the whitening room. First press the power button to start, and then put down the thallium.
4. When the specified time is reached, the Rice polisher will automatically stop, first take out the hopper and remove the chaff. Then plug in the receiving hopper, then take out the pressure thallium, turn the front turning handle to the right, so that the polished rice in the white grinding chamber falls into the receiving hopper, set the timing knob to the 0 position, press the power button to make the grinding wheel idling for a few seconds to make the grinding All the rice grains in the white chamber are dropped, and then the rice hopper is pulled out, and the measured rice is obtained after sieving.
In summary, it is a brief introduction to the operation method of Rice polisher.